Innovative Technology

Innovative Technology

Identity Verification

Estimated reading: 3 minutes 13 views

6.1 Allow Camera and Microphone Access

The first time you open an exam, the application asks for access to the camera and microphone.

  1. Read the Allow Camera message, and then tap Ok, Continue.
  2. When the message “QQ” Would Like to Access the Camera is displayed, tap Allow.
  3. When the message “QQ” Would Like to Access the Microphone is displayed, tap Allow.

If you tapped Don’t Allow by mistake, open Settings > QQ, turn on Camera and Microphone, and then reopen the application.


Figure 6-1 Camera Monitoring Notice


Figure 6-2 Camera Access Request


Figure 6-3 Microphone Access Request

6.2 Face Snapshot

  1. Tap Capture Your Face.
  2. Read the instructions. Make sure your face is clearly visible, avoid light directly behind you, and check that your internet connection is stable.
  3. Tap Capture Your Face to take the picture.
  4. Review the picture. To retake it, tap the delete icon on the picture.
  5. When the message A picture of your face was taken is displayed, tap Next.

When your face is detected, a green frame is displayed around the camera preview, and the message 1 face(s) detected is shown above it. After the picture is taken, the message ” A picture of your face was taken is displayed. If your university permits it, Skip may be available to continue without a face snapshot.

⚠ IMPORTANT: This step may be mandatory or optional, depending on the exam configuration. If mandatory, a face snapshot must be captured before proceeding, and the step cannot be skipped. If optional, the Skip button is available, allowing you to skip the step and continue to the next section.


Figure 6-4 Face Snapshot Screen


Figure 6-5 Face Capture Instructions


Figure 6-6 Face Snapshot Captured

6.3 ID Card Photo

  1. Tap ID Card Snapshot.
  2. Hold your valid ID card within the camera frame. Avoid glare and reflections, and keep the card steady.
  3. Tap the shutter button to take the picture.
  4. Review the picture, and then tap Next.

When the ID card is positioned correctly, a green frame appears around the camera preview. After the image is captured, the message ID snapshot captured successfully is displayed.

⚠ IMPORTANT: This step may be mandatory or optional, depending on the exam configuration. If mandatory, a photo of your ID card must be captured before proceeding, and the step cannot be skipped. If optional, the Skip button is available, allowing you to skip the step and continue to the next section.


Figure 6-7 ID Card Snapshot Screen


Figure 6-8 Capturing the ID Card

6.4 Review Exam Information

Review the information displayed, including:

  • Exam name.
  • Course.
  • Total duration.
  • Remaining duration.
  • Language.
  • Proctoring Status ( Environment Checks are required for proctored exams to verify that your device and exam environment meet the required conditions before you start the exam.)
  • Exam instructions.

When you are ready, tap Start Exam.

⚠ IMPORTANT: The exam runs on a fixed schedule. If it has already started, the screen shows the time remaining to join. You cannot join once the exam time is over.


Figure 6-9 Exam Information

CONTENTS
Antimanual

Ask our AI support assistant your questions about our platform, features, and services.

You are offline
Chatbot avatar
What can I help you with?